Glove Box Lamp: Service and Repair

REMOVAL PROCEDURE




1. Remove the instrument panel storage compartment.
2. Using a small flat bladed tool release the retainer tabs securing the IP storage compartment lamp to the IP storage compartment.
3. Disconnect the electrical connector from the IP storage compartment lamp.




4. Remove the bulb from the IP storage compartment lamp.

INSTALLATION PROCEDURE




1. Install the bulb into the IP storage compartment lamp.




2. Install the IP storage compartment lamp into the IP storage compartment.
3. Connect the electrical connector to the IP storage compartment lamp.
4. Install the instrument panel storage compartment.