License Plate Lamp: Service and Repair

REMOVAL PROCEDURE




1. Open the rear compartment lid.
2. Remove the compartment lid trim. Refer to Compartment Lid Trim Replacement - Rear in Trunk/Liftgate.
3. Disconnect the lamp socket (1) from the license lamp housing (2) by turning 1/4 turn counter clockwise.
4. Remove the fasteners (3) securing the license lamp housing (2) to the rear compartment lid.
5. Remove the license lamp housing (2) from the rear compartment lid.

INSTALLATION PROCEDURE




1. Position the license lamp housing (2) into the rear compartment lid.
2. Install the license lamp housing fasteners (3) in order to secure the license lamp housing to the rear compartment lid.
3. Install the lamp socket (1) into the licence lamp housing (2) by turning 1/4 turn clockwise in order to secure.
4. Install the compartment lid trim. Refer to Compartment Lid Trim Replacement - Rear in Trunk/Liftgate.
5. Close the rear compartment lid.