Child Seat Tether Attachment: Service and Repair
CHILD RESTRAINT TETHER ANCHORREMOVAL PROCEDURE
1. Remove the rear shelf trim panel.
2. Remove the rear shelf trim panel carrier.
3. Remove the fasteners from the child tethor anchors.
4. Remove the child tether anchors from the vehicle.
INSTALLATION PROCEDURE
1. Install the child tethor anchors to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the child tether anchor fasteners.
Tighten
Tighten the fastener to 30 N.m (22 lb ft).
3. Install the rear shelf trim panel carrier.
4. Install the rear shelf trim panel.