Front

REMOVAL PROCEDURE

CAUTION: Refer to SIR Caution in Service Precautions.

NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.




1. Remove the front seat.
2. Remove the seat belt tower rear trim cover by inserting a small rounded tool in the access hole in order to release the retainer.




3. Remove the seat belt tower front trim cover fasteners (1).




4. Remove the front seat back cover and pad enough to expose the shoulder belt retractor fastener (1).
5. Remove the shoulder belt retractor fastener (1).
6. Remove the shoulder belt retractor.




7. Remove the seat adjuster track cover.
8. Remove the lap retractor fastener (3).
9. Remove the lap belt retractor.

INSTALLATION PROCEDURE




1. Install the lap belt retractor over the stud. Align the tab on the retractor with the notch in the seat frame.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the lap belt retractor fastener (3).

Tighten
Tighten the fastener (3) to 35 N.m (26 lb ft).




3. Install the seat adjuster track cover.
4. Install the shoulder belt retractor over the stud.
Align the tab on the retractor with the notch in the seat back frame.
5. Ensure the seat belt is not twisted.
6. Install the shoulder retractor fastener (1).

Tighten
Tighten the fasteners to 35 N.m (26 lb ft).




7. Install the seat back cover and pad.
8. Install the seat belt tower front trim cover fastener (1).

Tighten
Tighten the fasteners to 2 N.m (18 lb in).




9. Install seat belt tower rear cover
10. Install the front seat.