Rear

REMOVAL PROCEDURE

NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.




1. Remove the rear seat cushion.
2. Remove the center shoulder belt anchor and right side buckle fastener.
3. Remove the left side seat buckle fastener.




4. Remove the rear seat back.
5. Remove the rear seat belt anchor fasteners from the floor.




6. Remove the rear quarter trim panels.
7. Remove the rear shelf trim panel.
8. Remove the rear seat back retractor fastener.
9. Remove the rear seat belt retractor.

INSTALLATION PROCEDURE




1. Install the rear seat belt retractor.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the rear seat belt retractor fastener.

Tighten
Tighten the fastener to 41 N.m (30 lb ft).




3. Install the rear seat belt anchor fastener to the floor.

Tighten
Tighten the anchor fastener to 41 N.m (30 lb ft).

4. Install the rear shelf trim panel.
5. Install the rear quarter trim panels.




6. Install the rear seat back.
7. Install the center shoulder belt anchor and right and left buckle fasteners.

Tighten
Tighten the center shoulder belt anchor and buckle fasteners to 41 N.m (30 lb ft).

8. Install the rear seat cushion.