Torque Rod Adjustment

TOOLS REQUIRED
J 43300 Rear Deck Lid Torsion Rod Adjuster

CAUTION: When a rear compartment lid hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.




1. Support the rear compartment lid.
2. Remove the front rear compartment trim.
3. Install the J43300 (1) to the torque rod. Use a ratchet extension (2) for extra leverage.
4. Adjust the torque rods to 1 of 3 positions in the adjustment bracket for the desired tension.
4.1. Moving the torque rod to a lower notch in the adjustment bracket increases the effort in raising the lid, but decreases the effort in closing the lid.
4.2. Moving the torque rod to a higher notch in the adjustment bracket decreases the effort in raising the lid, but increases the effort in closing the lid.