Seat Belt Replacement - Center Rear

REMOVAL PROCEDURE

NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.




1. Remove the rear seat cushion.
2. Remove the center rear seat belt anchor fastener.
3. Slide the center rear seat belt anchor plate out from under the rear seat back hold-down.
4. Remove the center rear seat belt from the vehicle.

INSTALLATION PROCEDURE




1. Install the center rear seat belt anchor plate under the rear seat back hold-down.
2. Ensure the center rear shoulder belt is not twisted.

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Assure that the fastener threads and fastener hole are free of any sealer patch material.

3. Install the center rear seat belt anchor fastener.

Tighten
Tighten the center rear seat belt anchor fastener to 41 N.m (32 lb ft).

4. Install the rear seat cushion.