Steering Wheel Control Switch

Steering Wheel Control Switch Assembly Replacement

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Disable the SIR system.
2. Remove the steering wheel inflatable restraint module.
3. Remove the steering wheel control switch by gently pulling it away from the steering wheel.





4. Disconnect the steering wheel control switch electrical connector.
5. Remove the steering wheel control switch from the steering wheel.

Installation Procedure





1. Connect the electrical connector to the steering wheel control switch.
2. Align the steering control switch engagement tabs to the steering wheel.
3. Push in on the steering wheel control switch in order to secure the steering wheel control switch to the steering wheel.
4. Install the steering wheel inflatable restraint module.
5. Enable the SIR.