Amplifier: Service and Repair

AMPLIFIER REPLACEMENT

REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the rear seat back.




3. Disconnect the radio amplifier electrical connectors (2).
4. Remove the fasteners retaining the radio amplifier to the mounting bracket.
5. Lift the radio amplifier to remove.

INSTALLATION PROCEDURE




1. Install the alignment tabs (1), on the radio amplifier, over the mounting bracket.
2. Install the radio amplifier electrical connectors (2).
3. Install the fasteners to retain the radio amplifier to the mounting bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the fasteners to 9 N.m (80 lb in).

4. Install the rear seat back.
5. Install the rear seat cushion.