Zone 1

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.




4. Remove the rear seat.
5. Locate the rear fuse center under rear seat, then remove the fuse center top cover.
6. Locate and remove the SIR fuse from the rear fuse center.

IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.




7. Open front hood, and locate the front end sensor (2) sometimes referred to as Electronic Frontal Sensor (EFS).
8. Remove the Connector Position Assurance (CPA) (3) from the EFS (2).
9. Remove the EFS connector (1) from the EFS (2).