Cruise Control Servo Cable: Service and Repair

CRUISE CONTROL CABLE REPLACEMENT (WITH RPO CODE L47)

REMOVAL PROCEDURE




1. Disconnect the cruise control cable from the throttle body cam (1).

IMPORTANT: Note the cable routing for replacement.

2. Disconnect the cruise control cable from the throttle body bracket.




3. Twist the cruise control cable housing counterclockwise in order to release the cable housing from the cruise control module.




4. Disconnect the cruise control cable ball stud (1) from the actuator strip (2) on the cruise control module.




5. Remove the cable from the retainer (2).

INSTALLATION PROCEDURE




1. Install the cruise control cable ball stud (1) into the slot in the cruise control module actuator strip (2).
2. Insert the cruise control cable housing into the cruise control module and twist clockwise to secure.




3. Connect the cruise control cable to the throttle body cam (1).

IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation for the complete operational details.

4. Snap the cable clip (3) to the throttle body bracket.




5. Install the cable into the retainers (2).