| Camshaft Intermediate Drive Shaft | Bolt | 89 inch lbs. |
| Sprocket Bolt | 44 ft. lbs. |
| Camshaft | Camshaft Material | Hardened Cast Gray Iron |
| Bearing Number | 5 |
| Bearing Number on Left Cylinder Head intake | 6 |
| Bearing Journal Diameter | 1.0610-1.0619 inch |
| Bearing Bore Diameter, In Cylinder Head | 1.0635-1.0642 inch |
| Bearing Clearance | 0.0020-0.0030 inch |
| Production Limits | 0 0016-0 0035 inch |
| Service Limits - Maximum | 0.0035 inch |
| Runout | 0.0020 inch |
| Out-of-Round | 0.0002 inch |
| Straightness | 0.0003 inch |
| Thrust Width | 0.9051-0.9091 inch |
| Timing, @ 0.150 mm lift. intake opens | 5.6° BTDC |
| Intake Centerline | 113° ABDC |
| Intake Closes | 236.8° ABDC |
| Exhaust Opens | 222.5° BTDC |
| Exhaust Centerline | 107° BTDC |
| Exhaust Closes | 13.8° ABDC |
| Camshaft Lift, Intake | 0.2421 inch |
| Exhaust | 0.2339 inch |
| Valve Intake | 0.4134 inch |
| Exhaust | 0.3937 inch |
| Duration @ 0.150 mm lift, intake | 242° |
| Exhaust | 236° |
| Valve Overlap, @ 0.150 mm lift | 1.98° |
| Left Intake Water Pump Drive End, Diameter | 0.6241-0.6261 inch |
| Diameter Within Last (0.7677 inch) | 0.6249-0.6253 inch |
| Runout | 0.0059 inch |
| Camshaft Drive | Primary Drive Type | Endless Chain |
| Adjustment | Hydraulic, Automatic |
| Pitch | 0.315 inch |
| Width | Single Row |
| Secondary Drive Type | Endless Chain |
| Adjustment | Hydraulic, Automatic |
| Pitch | 0.315 inch |
| Width | Single Row |