Catalytic Converter: Technical Service Bulletins
- Recalls
- Recall - Excessive HC and CO Emissions
- Overview
- Parts
- Owner Notification and Service Scheduling
- Service Procedure
- A. Verify Choke Shim Presence
- B. Install Choke Shim (If Necessary)
- C. Install Jet Mixture Solenoid
- D. Verify Proper Primary Air Bleed Jet
- E. Replace Front Catalyst/Inspect/Replace Exhaust Manifold
- F. Check Vacuum Hose Harness Installation
- G. Vacuum Hose Harness Installation (If Necessary)
- H. Check Idle Speed and Basic Timing
- I. Test Feedback Carburetor
- J. Adjust Idle Speed & Mixture Screw (If Necessary)
- K. Replace Carburetor (Only For Continued High CO Level)
- L. Install Hose Routing Label
- M. Reset Radio Presets
- N. Install Recall Completion Label
- O. Complete Proof of Correction Form
- Owner Letter
- Recall - Excessive HC and CO Emissions
- All Technical Service Bulletins
- Recall - Excessive HC and CO Emissions
- Overview
- Parts
- Owner Notification and Service Scheduling
- Service Procedure
- A. Verify Choke Shim Presence
- B. Install Choke Shim (If Necessary)
- C. Install Jet Mixture Solenoid
- D. Verify Proper Primary Air Bleed Jet
- E. Replace Front Catalyst/Inspect/Replace Exhaust Manifold
- F. Check Vacuum Hose Harness Installation
- G. Vacuum Hose Harness Installation (If Necessary)
- H. Check Idle Speed and Basic Timing
- I. Test Feedback Carburetor
- J. Adjust Idle Speed & Mixture Screw (If Necessary)
- K. Replace Carburetor (Only For Continued High CO Level)
- L. Install Hose Routing Label
- M. Reset Radio Presets
- N. Install Recall Completion Label
- O. Complete Proof of Correction Form
- Owner Letter
- Recall - Excessive HC and CO Emissions