11-Step B, Fuel Injector Connector Wires

1. With fuel injector electrical connector disconnected, place ignition switch in the Off position.
2. Disconnect [1][2]power module 10 terminal electrical connector.
3. Connect an ohmmeter between terminal No. 7 of [1][2]power module electrical connector and white wire terminal of injector electrical connector.
4. If ohmmeter indicated continuity, proceed to Test 11 step C.
5. If ohmmeter does not indicate continuity, check wiring from [1][2]power module electrical connector terminal No. 7 to injector for open circuit.