Without Power Windows

PRE-REMOVAL 0PERATION
^ Removal of door mirror

REMOVAL STEPS
1. Clip
2. Regulator handle
3. Escutcheon
4. Armrest
5. Cap
6. Inside handle cover
7. Electric remote-control mirror switch
8. Door mirror cover (front door)
9. Ashtray (rear door)
10. Inside lock knob
11. Connection of door harness connector
12. Door trim
13. Door pocket (front door)
14. Trim clip
15. Waterproof film

NOTES:
1. Reverse the removal procedures to reinstall.
2. Arrows indicate clip positions.

SERVICE POINTS OF REMOVAL





1. Removal Of Clip
Remove the clip by using a rag as illustration, and then remove the regulator handle.





14. Removal Of Trim Clip
If trim clips remain at the door side when the door trim is removed, improvise a tool (such as shown in the illustration) to remove them.

SERVICE POINTS OF INSTALLATION









15. Application Of Adhesive To Waterproof Film
Apply a coating of specified butyl rubber tape to the position shown in the illustration, and then attach the waterproof film.

Specified adhesive: MOPAR Rope Caulk Sealer 3/16 x 80" roll Part No. 4026044 or equivalent