Trim Panel: Service and Repair

REMOVAL STEPS
1. Front scuff plate
2. Rear scuff plate B
3. Parcel strap anchor C
4. Clip
5. Rear step trim
6. Spare tire clamp (4WD)
7. Spare tire (4WD)
8. Quarter trim cover (4WD)
9. Ventilator garnish
10. Lower quarter trim
11. Second seat belt sash guide plug
12. Second seat belt sash guide
13. Upper quarter trim
14. Front seat belt sash guide cover
15. Front seat belt sash guide
16. Center pillar upper trim
17. Center pillar lower trim
18. Roof rail trim
19. Door openin9 trim
20. Cowl side trim
21. Cowl side triming
22. Front pillar trim

NOTES:
1. N : Non-reusable parts
2. *1 : 2WD
3. *2 : 4WD


SERVICE POINTS OF REMOVAL





1. Removal Of Front Scuff Plate
1. Remove the installation clip of the fro~~ end of the front scuff plate.
2. Pry open the tabs in order from the front, and remove the front scuff plate.





2. Removal Of Rear Scuff Plate
Pry open the tabs in order from the rear, and remove the rear scuff plate.









5. Removal Of Rear Step Trim
1. Remove the parcel strap anchor C.
2. Detach the clips, and then remove the rear step trim.





10. Removal Of Lower Quarter Trim
Remove the lower quarter trim installation screws, and then remove the lower quarter trim by prying the clips.





13. Removal Of Upper Quarter Trim
1. Remove the clip at the rearmost part of the roof rail trim, and open a clearance which will permit removal of the upper quarter trim.
2. Remove the upper quarter trim by prying the clips.





16. Removal Of Center Pillar Upper Trim
Move the upper end of the trim down toward the vehicle interior, and then remove the trim from the body flange by pulling the entire trim upward.





17. Removal Of Center Pillar Lower Trim
Bend as shown in the illustration, and then remove the lower center pillar trim from the body flange.





18. Removal Of Roof Rail Trim
Pull the roof rail trim clips downward in order from the end of the rail, and then remove the roof rail trim.

NOTE: Take care to handle the roof rail trim carefully. because it is easily bend.





20. Removal Of Cowl Side Trim
Remove the clips, and then remove the cowl side trim.





22. Removal Of Front Pillar Trim
1. Remove the clip at the foremost part of the roof rail trim, and open a clearance which will permit removal of the front pillar trim.
2. Slightly pull the upper end of the trim to spread it open. Then insert a screwdriver or similar tool and pry clip A to remove it, and then remove the front pillar trim.