Rear Door Window Glass: Service and Repair

Front Door Glass:

REMOVAL
1. Remove door trim panel. silencer pad, and Water shield.
2. Position door glass half way up in door glass opening.
3. Pull upward firmly at the front upper corner of glass to disengage lower glass guide from run channel.
4. Insert door glass removal tool C-4867 between the glass slide and division run channel retaining lip it approximately 50 mm (2 in.) down from top rearward corner of glass. Push handle of tool toward glass to open channel. Pull forward on the glass to separate the slide from the channel.
5. Position glass inboard of the division channel. Pivot top of glass rearward between division channel and inner door panel.
6. Separate regulator lift arm roller from glass lift channel. Hold regulator lift arm outward and lift glass upward.
7. Remove door glass through opening at top of door.

INSTALLATION
1. Lower door glass into opening at top of door.
2. Insert window regulator lift Arm roller into glass lift channel.
3. Push top of glass rearward to snap top slide into division run channel.
4. Push downward at front of glass to snap bottom slide into channel.
5. Install water shield, silencer pad and trim panel.