Timing Cover: Service and Repair

CAUTION: Camshaft or crankshaft should not be rotated after timing belt is removed. Damage to valve components may occur. Always align timing marks before removing timing belt.

REMOVAL
1. Remove accessory drive belts.





2. Raise vehicle on a hoist and remove right inner splash shield.





3. Remove crankshaft damper bolt. Remove damper using Special Tool 1026 and Insert 6827-A or equivalent.
4. Lower vehicle and place a jack under engine
5. Remove right engine mount.





6. Remove right engine mount bracket.
7. Remove timing belt cover fasteners, remove cover.

INSTALLATION
1. Install front timing cover.
2. Install engine mount bracket.
3. Install Right engine mount.
4. Remove jack from under engine.
5. Install crankshaft vibration damper
6. Install accessory drive belts.
7. Raise vehicle on hoist and install right inner splash shield.