Instrument Panel End Cap Replacement

LEFT ENDCAP
REMOVAL

Instrument Panel Breakdown:

1. Open the left door and pull on the access handle and pivoting around A-pillar to disengage endcap clips. Fuse Puller, Spare Fuses and Fuse Diagram are located on left endcap. Fuse access is under left endcap.

INSTALLATION
- For installation, reverse the above procedures. Ensure spare fuses are seated to left endcap.

RIGHT ENDCAP
REMOVAL
1. Open right door.
2. Remove right endcap by pulling rearward to disengage clips.

INSTALLATION
- For installation, reverse the above procedures.