Diesel Data: Automotive Repair
Home >> Plymouth >> 1997 >> Prowler V6-3.5L VIN F >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Harmonic Balancer - Crankshaft Pulley >> Service and Repair

Harmonic Balancer - Crankshaft Pulley: Service and Repair

REMOVAL
1. Disconnect negative cable from battery.





2. Remove the front engine compartment supports.





3. Remove upper radiator crossmember.





4. Remove fan module.
5. Remove the accessory drive belts.
6. Hoist vehicle.





7. Use Special Tool 8191, or equivalent to hold crankshaft damper while removing center bolt.





8. Use Special Tool 1023 puller, and insert C-4685-C2, or equivalents to remove crankshaft damper.





INSTALLATION
1. Install crankshaft damper by tightening the nut of Special Tool 6792, or equivalent. Install center bolt and while holding crankshaft damper with Special Tool 8191, or equivalent tighten center bolt to 115 Nm (85 ft. lbs.).
2. Lower vehicle.
3. Install accessory drive belts.
4. Install fan module.
5. Install upper radiator crossmember and engine compartment supports.
6. Connect negative battery cable.


Diesel-Data.com