Hazard Warning Flasher: Service and Repair

WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS SYSTEMS BEFORE ATTEMPTING STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

REMOVAL
1. Open hood.
2. Disconnect and isolate the negative battery cable.
3. Remove the knee blocker/lower steering column cover trim panel.

Combination Flasher Location:

4. Remove the combination flasher (blue). The combination flasher is taped to the steering column wire harness.

INSTALLATION
1. To install the flasher, align the terminals with the cavities in the connector and push the flasher firmly into place.
2. Test the combination flasher operation.
3. Install the knee blocker/lower steering column cover trim panel.