General Information

NOTE: On this vehicle the front and rear wheel alignment must be checked and adjusted to the preferred specifications, with the vehicle at its correct curb height.

1. Correctly position the vehicle on the alignment equipment per the alignment equipment manufacturer's recommendations.
2. Check that all tires are at the recommended inflation pressure and adjust as necessary if they are not. Refer to the tire information label on the B-pillar of the drivers side door for the recommended tire inflation pressure.
3. Check the front and rear curb height of the vehicle to ensure the vehicle is at the correct height prior to checking and or adjusting the alignment angles.

NOTE: If vehicle is within required curb height specification, proceed to step 4. Specifications

NOTE: If the vehicle is not within the required range of the curb height specification, do not perform a front or rear wheel alignment procedure. The vehicle MUST be within the required curb height specification to obtain an accurate wheel alignment. After the vehicle is at the correct curb height proceed with the alignment procedure.





4. Attach alignment heads onto the vehicle wheels. This vehicle uses flangeless style wheels, thus any alignment equipment used must be capable of attaching to outside edge of the wheel bead.