Front Bumper Fascia Energy Absorber Replacement

Front Bumper Fascia Energy Absorber Replacement

Removal Procedure




1. Remove the front bumper fascia.
2. Remove the upper center pal/speed nut (1) from the energy absorber.
3. Remove the push-in retainers (2) from the energy absorber.
4. Remove the energy absorber from the front bumper fascia.

Installation Procedure




1. Position the energy absorber to the front bumper fascia.

Notice: Refer to Fastener Notice.

2. Install the upper center pal/speed nut (1) to the energy absorber.
3. Install the push-in retainers (2) to the energy absorber.
4. Install the front bumper fascia.