Brake Pressure Modulator Valve Bracket Replacement

Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure




1. Turn the ignition switch to the OFF position.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Remove the left front tire and wheel assembly.
4. Remove the 3 brake pressure modulator valve (BPMV) bracket nuts.




5. Remove the 4 BPMV bolts.
6. Carefully lift the BPMV assembly and support the assembly.
7. Remove the bracket from the vehicle.

Installation Procedure




1. Install the bracket to the vehicle.
2. Install the 3 brake pressure modulator valve (BPMV) bracket nuts.

Notice: Refer to Fastener Notice .

Tighten the nuts to 10 N.m (89 lb in).




3. Install the 4 BPMV bolts.

Tighten the bolts to 10 N.m (89 lb in).

4. Install the left front tire and wheel assembly.
5. Lower the vehicle.