Engine Mount Bracket Replacement

Engine Mount Bracket Replacement

Removal Procedure





1. Remove the engine mount. Refer to Engine Mount Replacement (Service and Repair) .
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.



Installation Procedure





1. Position the engine mount bracket to the engine.
2. Install until snug the engine mount bracket bolts in the following locations:

* The long bolts in the forward and front lower holes
* The short bolt in the rear upper hole


Notice: Refer to Fastener Notice .

3. Tighten the engine mount bracket bolts.

Tighten the bolts to 100 N.m (74 lb ft).

4. Install the engine mount. Refer to Engine Mount Replacement (Service and Repair) .