Instrument Panel Insulator Panel Replacement - Left Side (LHD)

Instrument Panel Insulator Panel Replacement - Left Side (LHD)

Removal Procedure





1. Remove the diagnostic plug to I/P lower trim plate assembly retaining screws (2).
2. Remove the diagnostic plug (1) from the I/P lower trim plate assembly (3).




3. Grasp the I/P lower trim plate assembly (1) and carefully pull downward to disengage the retaining clips.
4. Remove the I/P lower trim plate assembly (1).



Installation Procedure





1. Install the diagnostic plug (2) to the I/P lower trim plate assembly (1).
2. Align the I/P lower trim plate assembly (1) to the I/P.
3. Install the I/P lower trim plate assembly (1) to the I/P by pushing in the area of the retaining clips (2).
4. Ensure all clips are located correctly.




5. Install the diagnostic plug (1) to the I/P lower trim plate assembly (3).

Notice: Refer to Fastener Notice (Fastener Notice) .

6. Install the diagnostic plug to I/P lower trim plate assembly retaining screws (2).

Tighten the screws (1) to 2 N.m (18 lb in).