Rear Side Door Sill Trim Plate Replacement

Rear Side Door Sill Trim Plate Replacement

Removal Procedure

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) .




2. Remove the retaining torx screw (1) from the rear sill panel trim.
3. Remove the retaining pin (2) and remove the rear sill panel trim by pulling from the lower edge and disengaging the retaining clips.



Installation Procedure

1. Install the rear sill panel trim.




Notice: Refer to Fastener Notice (Fastener Notice) .

Install the rear sill panel trim retaining torx screw (1).

Tighten the torx screw (1) to 2.0 N.m (18 lb in).

2. Install the rear sill panel trim retaining pin (2).
3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) .