120. Water Pump Installation

Water Pump Installation


Important: Make sure all mating surfaces are clean and free of grease.


1. Using a water sealant install the water pump and gasket to front engine cover.
2. Make sure all retaining bolts are clean and free of debris.




3. Install the water pump (1) and NEW gasket (2).

Notice: Refer to Fastener Notice (Fastener Notice) .

4. Install the water pump to engine front cover retaining bolts (3).

Tighten the bolts to 10 Nm (89 lb in).





5. Install the water pump pulley (2) to the water pump (3)
6. Install the water pump pulley to water pump retaining bolts (1).

Tighten the bolts to 10 Nm (89 lb in).