Diesel Data: Automotive Repair
Home >> Pontiac >> 2008 >> G8 V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 78. Engine Front Cover Assemble

78. Engine Front Cover Assemble



Engine Front Cover Assemble


Tools Required
* EN-46103 Camshaft Actuator Valve Seal Remover/Installer
* J 29184 Oil Seal Installer








Important: DO NOT lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.


1. Install the NEW crankshaft front oil seal into the engine front cover using the J 29184.




2. Install the NEW camshaft position actuator solenoid seals into the engine front cover using the EN-46103.


Diesel-Data.com