Evaporative Emission Control Canister: Service and Repair

Evaporative Emission Canister Replacement

Removal Procedure

Caution: Refer to Vehicle Lifting Caution (Service Precautions) .
Caution: Refer to Safety Glasses Caution (Safety Glasses Warning) .
1. Remove the rear frame. Refer to Rear Frame Replacement (Rear Frame Replacement) .




2. Disconnect the evaporative emission (EVAP) hoses (1&3) from the EVAP canister.
3. Remove the purge canister to chassis retaining bolts (2).



Installation Procedure





1. Install the purge canister to chassis retaining bolts (2).
Notice: Refer to Fastener Notice (Fastener Notice) .



Tighten the EVAP canister retaining nuts to 6 N.m (53 lb in).

2. Connect the evaporative emission (EVAP) hoses (1&3) from the EVAP canister.
3. Install the rear frame. Refer to Rear Frame Replacement (Rear Frame Replacement) .