Diesel Data: Automotive Repair

Battery Tray: Service and Repair



Battery Tray Replacement

Removal Procedure

1. Remove the cargo area centre carpet. Refer to Rear Compartment Floor Panel Carpet Replacement (Service and Repair)
2. Remove the left-hand side cargo area trim. Refer to Rear Compartment Side Trim Panel Replacement (Service and Repair)
Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
3. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair) .
4. Remove the battery refer to Battery Replacement (Battery Replacement) .





Important: To remove the fuse box, the locking tabs (1) must be released, push the fuse box towards the front of the vehicle to allow the fuse box to be released from the battery tray (2).


5. Remove the fuse box from the battery tray to allow access to the retaining bolts.




6. Remove the battery tray to chassis mounting bolts (1).
7. Remove the battery tray from the vehicle (2).



Installation Procedure





1. Fit the battery tray to the vehicle (2).

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Fit the battery tray to chassis retaining bolts (1).

Tighten the bolts to 25 N.m (18 lb ft).






Important: The fuse box locking tabs (1) must be located correctly into the battery tray (2), push the fuse box towards the rear of the vehicle to lock the fuse box into place.


3. Install the fuse box to the battery tray.
Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
4. Install the battery refer to Battery Replacement (Battery Replacement) .
5. Install the left-hand side cargo area trim. Refer to Rear Compartment Side Trim Panel Replacement (Service and Repair)
6. Install the cargo area centre carpet. . Refer to Rear Compartment Floor Panel Carpet Replacement (Service and Repair)