Torque Converter Fluid Seal Replacement

Torque Converter Fluid Seal Replacement


Tools Required
* J 8092 Universal driver Handle
* J 44766 Seal Installer
* J 45000 Seal Remover



Removal Procedure

1. Remove the transmission torque converter. Refer to Torque Converter Replacement (5L40-E/5L50-E - Automatic Transmission) .




2. Remove and discard the torque converter seal retaining bolts.
3. Remove the torque converter seal using J 45000 .



Installation Procedure





1. Assemble J 8092 onto J 44766 .
2. Install the torque converter seal onto the tool before installing into the case to prevent damage to the seal.

Important: Align the torque converter seal with the bolt holes.


3. Install the torque converter seal into the torque converter housing.

Notice: Refer to Fastener Notice (Fastener Notice) .

4. Install the NEW torque converter seal retaining bolts.

Tighten the bolts to 3.6 N.m (32 lb. in).

5. Install the transmission torque converter. Refer to Torque Converter Replacement (5L40-E/5L50-E - Automatic Transmission) .