Hood Open Assist Rod Stud Replacement

Hood Open Assist Rod Stud Replacement

Removal Procedure


Important: When a suitable hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.


1. Install a suitable hood brace to the vehicle.
2. Remove the hood assist rod. Refer to Hood Open Assist Rod Replacement (Service and Repair) .




3. Remove the hood assist rod upper ball stud (1) from the hood.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the hood assist rod upper ball stud (1) to the hood.

Tighten the ball stud to 18 N.m (15 lb ft).

2. Install the hood assist rod. Refer to Hood Open Assist Rod Replacement (Service and Repair) .
3. Remove the suitable hood brace from the vehicle.