Side Door Sill Nameplate Replacement

Side Door Sill Nameplate Replacement

Removal Procedure

1. Open the front and rear door.




Caution: Refer to Safety Glasses Caution (Safety Glasses Warning) Safety Glasses Caution.

Important: When removing the sill name plates (1), make sure the retaining clips are retained in the sill name plates (1).


2. Using a suitable tool carefully remove the sill name plates (1) from the vehicle (2).



Installation Procedure






Important: Before installing rear side door sill name plates (1), make sure all retaining clips are not damaged, if damaged replace as necessary.



Important: Make sure the lip of the weatherstrip sits over the sill plate.



Important: Firmly push down on the sill plates (1) to install. Listen for an audible click to confirm fitting.


1. Install the rear side door sill name plates (1) to the vehicle (2).
2. Close the front and rear door.