Oil Pan Cover Replacement

Oil Pan Cover Replacement

Removal Procedure





1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the oil pan cover to oil pan retaining bolts (2).
3. Remove the cover (1).
4. Remove the gasket (3).



Installation Procedure





1. Position the gasket (3) and cover (1) on the engine block.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the retaining bolts (2) for the cover.

Tighten the bolts to 12 N.m (106 lb in).

3. Lower the vehicle.