58. Engine Coolant Air Bleed Pipe and Hole Cover Cleaning and Inspection

Engine Coolant Air Bleed Pipe and Hole Cover Cleaning and Inspection






Important: Do not use the engine coolant air bleed pipe and cover seals again. Upon installation of the pipe and covers, install NEW seals.


1. Remove the vapour pipe gasket (1) from the pipe fitting nipple (2).
2. Clean the pipe and covers in solvent.
Caution: Refer to Safety Glasses Caution (Safety Glasses Warning) .
3. Dry the pipe and covers with compressed air.
4. Inspect the pipe and covers for damaged sealing surfaces or restrictions within the pipe.