78. Valve Rocker Arm Cover Installation - Left Side

Valve Rocker Arm Cover Installation - Left Side






Important:
* All gasket surfaces should be free of oil or other foreign material during assembly.

* DO NOT use the valve rocker arm cover gasket again.

* The valve rocker arm cover bolt grommets may be used again if not damaged.



1. Install a NEW gasket (1) into the valve rocker arm cover.




2. Install the valve rocker arm cover (2).

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the valve rocker arm cover to cylinder head retaining bolts (1) with grommets.

Tighten the bolts to 12 N.m (106 lb in).