Rear Door Window Glass: Service and Repair

Rear Side Door Window Replacement

Removal Procedure

Caution: Refer to Glass and Sheet Metal Handling Caution (Glass and Sheet Metal Handling Caution) .
1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Service and Repair) .
2. Remove the speaker. Refer to Radio Rear Side Door Speaker Replacement (Radio Rear Side Door Speaker Replacement) .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair) .
4. Remove the window inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Beltline) (Rear Side Door Window Inner Sealing Strip Replacement (Beltline)) .
5. Remove the rear door stationary window. Refer to Rear Side Door Window Frame Rear Applique Replacement () .
6. Remove the window inner weatherstrip. Refer to Rear Side Door Window Inner Weatherstrip Replacement (Rear Side Door Window Inner Weatherstrip Replacement) .
7. Remove the window outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement (Rear Side Door Window Outer Sealing Strip Replacement) .
8. Remove the window inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Window) (Rear Side Door Window Inner Sealing Strip Replacement (Window)) .
9. Raise and support the window to the full up position.




10. Loosen the window regulator to window retaining bolts (1).
11. Lower the window regulator approximately 1/2 way down position.

Important: With the aid of an assistant hold the window while the support is removed.


12. Remove the support from the window.





Important: Remove the window (1) with the aid of an assistant.


13. Remove the window (1) up and out of the door (2).



Installation Procedure






Important: Install the window (1) with the aid of an assistant.



Important: The window regulator should be approximately 1/2 way down before installing the window (1).


1. Install the window (1) down into the door (2).
2. Lower the window into the window clamps.
3. Lower the window.
4. Install the inner window weatherstrip. Refer to Rear Side Door Window Inner Weatherstrip Replacement (Rear Side Door Window Inner Weatherstrip Replacement) .
5. Install the rear door stationary window. Refer to Rear Side Door Window Frame Rear Applique Replacement () .
6. Install the window inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Window) (Rear Side Door Window Inner Sealing Strip Replacement (Window)) .
7. Start the vehicle in order to make sure maximum power to the window motor. This is required to fully seat the window for adjustment.
8. Raise the window to full up position.





Notice: Refer to Fastener Notice (Fastener Notice) .

9. Tighten the window regulator to window retaining bolts (1).

Tighten the nuts to 8 N-m (71 lb in).

10. Inspect the window for correct operation and a tight seal.
11. Shut off the vehicle.
12. Install the window outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement (Rear Side Door Window Outer Sealing Strip Replacement) .
13. Install the window inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Beltline) (Rear Side Door Window Inner Sealing Strip Replacement (Beltline)) .
14. Install water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair) .
15. Install the speaker. Refer to Radio Rear Side Door Speaker Replacement (Radio Rear Side Door Speaker Replacement) in Entertainment.
16. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Service and Repair) .