Rear Door: Service and Repair

Rear Side Door Replacement

Removal Procedure

1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Service and Repair).
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
3. Remove the outer sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement (Rear Door Window Belt Outer Sealing Strip Replacement).
4. Remove the door weather-strip. Refer to Rear Door Weatherstrip Replacement (Service and Repair).
5. Remove the door window weather-strip. Refer to Rear Side Door Window Weatherstrip Replacement (Rear Side Door Window Weatherstrip Replacement).
6. Remove the window guide channel. Refer to Door Window Guide Replacement (Door Window Guide Replacement).
7. Remove the door lock. Refer to Rear Door Lock Replacement (Rear Door Lock Replacement).
8. Remove the outside door handle. Refer to Rear Side Door Check Link Replacement (Service and Repair).
9. Remove the door window. Refer to Rear Side Door Window Replacement (Service and Repair).
10. Remove the door window regulator and motor. Refer to Rear Side Door Window Regulator Replacement (Service and Repair).
11. Remove the rear door speaker. Refer to Radio Rear Side Door Speaker Replacement (Radio Rear Side Door Speaker Replacement).
12. Remove the rear door body side molding. Refer to Rear Side Door Molding Replacement ().
13. Remove the rear lower door side molding. Refer to Rear Side Door Lower Molding Replacement ().




14. Remove the door check link. Refer to Rear Side Door Check Link Replacement (Service and Repair).
15. Release the door wiring harness grommet and unroute the wiring harness (2) from the door (4), if equipped.
16. Remove all the retainers from the rear door (4).
17. Mark the door hinge location.
18. Remove the following components from the vehicle:

* The 4 door to hinge bolts (1, 3)
* The rear door (4)




Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the rear door (4) to the vehicle. Align the matchmarks on the hinges in order to aid in the correct adjustment of the door. Secure the door to the hinges with the 4 bolts (1, 3).

Tighten the door to hinge bolts to 26 N.m (19 lb ft).

2. Install all the plastic retainers to the door (4).
3. Route the door wiring harness (2) and seat the grommet into position in the door.
4. Install the door check link. Refer to Rear Side Door Check Link Replacement (Service and Repair).
5. Install the rear door body side molding. Refer to Rear Side Door Molding Replacement ().
6. Install the rear door side lower molding. Refer to Rear Side Door Lower Molding Replacement ().
7. Install the door window regulator and motor. Refer to Rear Side Door Window Regulator Replacement (Service and Repair).
8. Install the rear door speaker. Refer to Radio Rear Side Door Speaker Replacement (Radio Rear Side Door Speaker Replacement).
9. Install the door window. Refer to Rear Side Door Window Replacement (Service and Repair).
10. Install the outside door handle. Refer to Rear Side Door Outside Handle Replacement (Service and Repair).
11. Install the door lock. Refer to Rear Door Lock Replacement (Rear Door Lock Replacement).
12. Install the window guide channel. Refer to Door Window Guide Replacement (Door Window Guide Replacement).
13. Install the door window weather-strip. Refer to Rear Side Door Window Weatherstrip Replacement (Rear Side Door Window Weatherstrip Replacement).
14. Install the door weather-strip. Refer to Rear Door Weatherstrip Replacement (Service and Repair).
15. Install the outer sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement (Rear Door Window Belt Outer Sealing Strip Replacement).
16. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement (Service and Repair).
17. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Service and Repair).