Front Fender Replacement - Right

Front Fender Replacement - Right Side

Removal Procedure






Notice: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

1. Raise and support the hood.
2. Remove the right fender flare. Refer to Front Fender Flare Replacement ().
3. Remove the right wheelhouse panel (1). Refer to Wheelhouse Panel Replacement (Service and Repair).
4. Remove the front fascia. Refer to Front Bumper Fascia Replacement (Front Bumper Fascia Replacement).
5. Remove the right rocker molding. Refer to Rocker Panel Molding Replacement (Accessory Molding) ()Rocker Panel Molding Replacement (Production Molding) ().
6. Remove the right head lamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Service and Repair).
7. Remove hood assist rod. Refer to Hood Hold-Open Rod Replacement (Service and Repair).
8. Remove right rear inner fender splash guard.




9. Remove the right front fender (1) to rocker panel bolt.




10. Remove the 2 right front fender to door jamb (3) bolts.




11. Remove the top 2 right front fender bolts (1).




12. Remove the 1 bolt (2) from the front of the right front fender.
13. Remove the right front fender (1) from the vehicle.



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the front fender (1) to the vehicle. Secure the fender with the 1 bolt (2).

Tighten the front fender bolt to 20 N.m (15 lb ft).





2. Install the top 2 front fender (1) bolts.

Tighten the top front fender bolts to 20 N.m (15 lb ft).





3. Install the 2 door jamb (3) to front fender bolts.

Tighten the door jamb to front fender bolts to 20 N.m (15 lb ft).





4. Install the front fender (1) to rocker panel bolt.

Tighten the front fender to rocker panel bolt to 20 N.m (15 lb ft).

5. Install right fender rear inner splash guard.
6. Install hood assist rod. Refer to Hood Hold-Open Rod Replacement (Service and Repair).
7. Install right headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Service and Repair).
8. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (Front Bumper Fascia Replacement).
9. Install the right rocker panel molding. Refer to Rocker Panel Molding Replacement (Accessory Molding) ()Rocker Panel Molding Replacement (Production Molding) ().
10. Install the right wheel house panel. Refer to Wheelhouse Panel Replacement (Service and Repair).
11. Install the right fender flare. Refer to Front Fender Flare Replacement ().
12. Close hood panel.