Seat Belt Retractor Replacement - Center Rear

Seat Belt Retractor Replacement - Center Rear

Removal Procedure





1. Remove the right rear seat cushion lower bolts. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).
2. Remove the rear seat belt retractor lower anchor bolt (5).
3. Remove the right rear seat back panel. Refer to Rear Seat Back Cushion Trim Panel Replacement (Left) (Rear Seat Back Cushion Trim Panel Replacement (Left))Rear Seat Back Cushion Trim Panel Replacement (Right) (Rear Seat Back Cushion Trim Panel Replacement (Right)).
4. Remove the seat belt guide (1).
5. Pull seat belt lower anchor through rear seat back.
6. Remove the following components from the vehicle:

* The mounting bolt (3)
* The rear seat center belt retractor (2)




Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the rear seat center belt retractor (2) to the seat back. Secure the retractor with the mounting bolt (3).

Tighten the rear seat belt retractor mounting bolt to 41 N.m (30 lb ft).

2. Install seat belt lower anchor through seat back.
3. Install the rear seat belt retractor lower anchor bolt (5).

Tighten the rear seat belt retractor lower anchor bolt to 41 N.m (30 lb ft).

4. Install seat belt guide (1).
5. Install right rear seat back cover. Refer to Rear Seat Back Cushion Trim Panel Replacement (Left) (Rear Seat Back Cushion Trim Panel Replacement (Left))Rear Seat Back Cushion Trim Panel Replacement (Right) (Rear Seat Back Cushion Trim Panel Replacement (Right)).
6. Install the right rear seat cushion lower bolts. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).