Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

Caution: Refer to Battery Disconnect Caution .
1. Remove the positive and the negative battery cable.
2. Remove the battery hold down bracket bolt and nut.
3. Remove the battery bracket.
4. Remove the battery and the battery tray.
5. Disconnect the IAT connector.
6. Remove the IAT sensor.
7. Remove the air cleaner hose and cap assembly.
8. Remove the air filter.
9. Remove the 3 air cleaner lower box bolts.
10. Remove the air cleaner box.
11. Support the engine with the engine support fixture. Refer to Engine Support Fixture (Engine Support Fixture).
12. Remove the transaxle left mount through bolt.
13. Remove the 4 bolts and the left transaxle mount.
14. Remove the 3 left transaxle bracket bolts and bracket.



Installation Procedure


Notice: Refer to Fastener Notice .

1. Install the 3 left transaxle bracket and bolts.

Tighten the transaxle bracket bolts to 80 N.m (59 lb ft).

2. Install the left transaxle mount and the 4 bolts.

Tighten the left transaxle mount bolts to 52 N.m (38 lb ft).

3. Install the transaxle mount through bolt.

Tighten the transaxle mount through bolt to 80 N.m (59 lb ft).

4. Remove the engine support fixture.
5. Install the air cleaner box.
6. Install the 3 air cleaner box bolts.
7. Install the air filter.
8. Install the air cleaner hose and cap assembly.
9. Install the IAT sensor.
10. Connect the IAT connector.
11. Install the battery tray and battery. Refer to Battery Replacement (Battery Replacement).
12. Install the hold down bracket.
13. Install the hold down bracket bolt and nut.

Tighten the hold down bracket bolt and nut to 12 N.m (106 lb in).

14. Install the positive and negative battery cables.