Digital Radio Receiver Bracket Replacement

Digital Radio Receiver Bracket Replacement

Removal Procedure

1. Remove the digital radio receiver module. Refer to Digital Radio Receiver Replacement (Digital Radio Receiver Replacement).




2. Disengage the digital radio receiver bracket to body retaining clips (2).
3. Lower the rear end of the digital radio receiver bracket (3) away from the body (1).




4. Slide the digital radio receiver bracket retainer (2) out of the body slot (1).
5. Remove the digital radio receiver bracket (3) from the vehicle.

Installation Procedure




1. Install the digital radio receiver bracket (3) to the vehicle.
2. Slide the digital radio receiver bracket retainer (2) into the body slot (1).





Notice: Listen for an audible click to confirm correct installation of the digital radio receiver bracket to body retaining clips (2).

3. Apply suitable upward pressure to the digital radio receiver bracket (3) to engage the digital radio receiver bracket to body retaining clips (2).
4. Install the digital radio receiver module. Refer to Digital Radio Receiver Replacement (Digital Radio Receiver Replacement).