Hood Open Assist Rod Stud Replacement

Hood Open Assist Rod Stud Replacement

Removal Procedure

Note: When a suitable hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Install a suitable hood brace to the vehicle.
2. Remove the hood assist rod. Refer to Hood Open Assist Rod Replacement (Service and Repair).




3. Remove the hood assist rod upper ball stud (1) from the hood.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the hood assist rod upper ball stud (1) to the hood and tighten to 18 Nm (15 lb ft).
2. Install the hood assist rod. Refer to Hood Open Assist Rod Replacement (Service and Repair).
3. Remove the suitable hood brace from the vehicle.