Trunk / Liftgate Striker: Service and Repair

Rear Compartment Lid Latch Striker Replacement

Removal Procedure

Note: When a suitable hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Support the rear compartment lid with a suitable brace.




2. Remove the rear compartment lid latch striker to rear compartment lid retaining torx screws (1).
3. Remove the rear compartment lid latch striker (2).

Installation Procedure




1. Position the rear compartment lid latch striker (2) to the rear compartment lid.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the rear compartment lid latch striker to rear compartment lid retaining torx screws (1) and tighten to 25 Nm (18 lb ft).
3. Remove the suitable brace from the vehicle.