Oil Pick Up/Strainer: Service and Repair

Oil Pump Suction Pipe and Screen Assembly Replacement

Removal Procedure

1. Remove the oil pan. Refer to Oil Pan Replacement (Service and Repair).




2. Remove the oil pan scraper bolts (1).
3. Remove the oil pan scraper (2).




4. Remove the oil suction pipe to oil pan retaining bolts (1).
5. Remove the oil suction pipe (2).





Note: The oil suction pipe seal (1) is a single use component and must be discarded whenever the oil suction pipe (2) is removed.

6. Remove the oil suction pipe seal (1) from the oil suction pipe (2).
Discard the oil suction pipe seal (1).

Installation Procedure




1. Install a NEW oil suction pipe seal (1) onto the oil suction pipe (2).




2. Install the oil suction pipe (2).

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the oil suction pipe using the oil pan retaining bolts (1) and tighten to 10 Nm (89 lb in).




4. Install the oil pan scraper (2).
5. Install the oil pan scraper to the oil pan retaining bolts (1) and tighten to 10 Nm (89 lb in).
6. Install the oil pan. Refer to Oil Pan Replacement (Service and Repair).