121. Water Pump Installation

Water Pump Installation

Note: Make sure all mating surfaces are clean and free of grease.

1. Using a water sealant install the water pump and gasket to front engine cover.
2. Make sure all retaining bolts are clean and free of debris.




3. Install the water pump (1) and NEW gasket (2).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the water pump to engine front cover retaining bolts (3) and tighten to 10 Nm (89 lb in).




5. Install the water pump pulley (2) to the water pump (3)
6. Install the water pump pulley to water pump retaining bolts (1) and tighten to 10 Nm (89 lb in).