17. Automatic Transmission Flex Plate Removal

Automatic Transmission Flex Plate Removal

Tools Required

EN 46106 Flywheel Holding Tool




1. Install the EN 46106 (1) through the starter mounting hole.





Important: Bolts with micro-encapsulated thread sealant must be discarded after removal.


Important: Make sure all the bolt holes are thoroughly cleaned and all micro-encapsulated thread sealant is removed.


2. Remove the engine flywheel to crankshaft retaining bolts (1).

* Discard the bolts.
* Clean the bolt holes.

3. Remove the engine flywheel (2).