Case Components Assemble

Case Components Assemble





Caution: Refer to Fastener Caution (Fastener Caution).

Note: If the pressure test plug (40), O-ring (66), level hole plug (36) and O-ring (37) are not damaged, they should be reused.

1. Inspect the pressure test hole plug (40) and O-ring seal (66) for damage.
2. Install the pressure test plug (40) and O-ring seal (66) and tighten to 11Nm (8 lb ft).
3. Inspect the fluid level hole plug (36) and O-ring seal (37) for damage.
4. Install the transmission fluid level hole plug O-ring seal (37) and the transmission fluid level hole plug (36) and tighten to 20Nm (15 lb ft).