5L40-E/5L50-E - Automatic Transmission

Automatic Transmission Fluid Pressure Test Hole Plug Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove and discard the oil pressure test plug.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install a NEW oil pressure test plug and tighten to 11 Nm (97 lb. in).
2. Check the transmission fluid level. Fill if necessary. Refer to Transmission Fluid Check (5L40-E/5L50-E Automatic Transmission).
3. Lower the vehicle.